Adnan Rafik = Adnan Rafique

Greetings,

We have most of the details ironed out about the Virtualization Deep Dive Day on Feb 12.  I think I have mentioned it to all of you.  I wanted to write to get commitment from you on your level of interest in participation.   At the very least, I would love for you to promote the event.  If possible, I would very much appreciate any assistance you could provide on the day of the event.  In a nutshell it is an all day virtualization event being held in Waltham MA.  We have Panopto lined up to simulcast to the web and would like to  have one track of the event presented at the NYC Microsoft Office on the day of the event.  There will be an opportunity for attendees in NYC to ask questions of the presenters and we hope to also have one or two subject matter experts onsite in NYC.  Edwin Woo will be the owner of the NYC part of the event.  We have reserved the MPR rooms (Belvedere & Bethesda Terrace Conference Room) which seats 75 people. We have at least one Microsoft person on cue to support the event.  I would be looking for you guys to do what you do best…

Help coordinate things on the ground in NYC and drive attendance.  Details of the event can be found at www.virtg.com/deepdive2010  All groups that participate at any level (even just promoting it to their users) will be listed on the website as sponsors.  Those that help with coordination will be eligible for profit sharing from the event.  We will handle registration on our end.  We have already lined up sponsors and speakers so it will be pretty easy on your part.  If you want to line up additional local sponsors/speakers, you are welcome to do that.

There will be a very small fee for attendees.  I think it will be $10 early bird and $15 after that.  We am arranging to get some Swag to you guys so at the end of the day when we do Swag handout’s you will do the same at your event.  All of the funds you bring in for the entry fee will go to the NYC groups that actively participate in the event. We will also be offering an online option after the event so people can attend virtually if they cannot make it the day of the event.  The online option will be $15.  If Live attendees want to also have access to the online content they can get a ticket for only $10.  All of these details and more will be documented once the registration site goes up next week.  All content will be streamed from Waltham MA.  If you have a speaker locally that you would rather cover the content (or change the content) that is fine with us.  We do have agreements with some vendors so there may be one or two sessions that we will not be able to change.  The NYC Schedule currently looks like the following:

Comments Off

While I’ve been going through the documentation of Windows Server 2008 R2 I’ve come across few geeky stuff  which you (systems admins) must know. I’m so excited about few of the enhancements.  I’ve compiled them in the form of tips.

Tip#1
Read-Only Domain Controllers
A read-only domain controller (RODC) is a new type of domain controller in the Windows Server® 2008 operating system. With an RODC, organizations can easily deploy a domain controller in locations where physical security cannot be guaranteed. An RODC hosts read-only partitions of the Active Directory® Domain Services (AD DS) database.

 Tip#2
Fine-grained password policies

You can use fine-grained password policies to specify multiple password policies within a single domain. You can use fine-grained password policies to apply different restrictions for password and account lockout policies to different sets of users in a domain.

For example, you can apply stricter settings to privileged accounts and less strict settings to the accounts of other users. In other cases, you might want to apply a special password policy for accounts whose passwords are synchronized with other data sources.

 Tip#3
Restartable Active Directory Domain Services
Administrators can stop and restart Active Directory® Domain Services (AD DS) in the Windows Server® 2008 operating system by using Microsoft Management Console (MMC) snap-ins or the command line.

Restartable AD DS reduces the time that is required to perform certain operations. AD DS can be stopped so that updates can be applied to a domain controller; also, administrators can stop AD DS to perform tasks such as offline defragmentation of the Active Directory database, without restarting the domain controller. Other services that are running on the server and that do not depend on AD DS to function, such as Dynamic Host Configuration Protocol (DHCP), remain available to satisfy client requests while AD DS is stopped.

Tip#4
Active Directory Recycle Bin
Information technology (IT) professionals can use Active Directory Recycle Bin to undo an accidental deletion of an Active Directory object. Accidental object deletion causes business downtime. Deleted users cannot log on or access corporate resources. This is the number one cause of Active Directory recovery scenarios. Active Directory Recycle Bin works for both AD DS and Active Directory Lightweight Directory Services (AD LDS) objects. This feature is enabled in AD DS at the Windows Server 2008 R2 forest functional level. For AD LDS, all replicas must be running in a new “application mode.”

Tip#5
Active Directory module for Windows PowerShell and Windows PowerShell™ cmdlets
The Active Directory module for Windows PowerShell provides command-line scripting for administrative, configuration, and diagnostic tasks, with a consistent vocabulary and syntax. It provides predictable discovery and flexible output formatting. You can easily pipe cmdlets to build complex operations. The Active Directory module enables end-to-end manageability with Exchange Server, Group Policy, and other services.

Tip#6
Active Directory Administrative Center
The Active Directory Administrative Center has a task-oriented administration model, with support for larger datasets. The Active Directory Administrative Center can help increase the productivity of IT professionals by providing a scalable, task-oriented user experience for managing AD DS. In the past, the lack of a task-oriented user interface (UI) could make certain activities, such as resetting user passwords, more difficult than they had to be. The Active Directory Administrative Center enumerates and organizes the activities that you perform when you manage a system. These activities may be maintenance tasks, such as backup; event-driven tasks, such as adding a user; or diagnostic tasks that you perform to correct system failures.

Tip#7
Active Directory Best Practices Analyzer
The Active Directory Best Practices Analyzer (BPA) identifies deviations from best practices to help IT professionals better manage their Active Directory deployments. BPA uses Windows PowerShell cmdlets to gather run-time data. It analyzes Active Directory settings that can cause unexpected behavior. It then makes Active Directory configuration recommendations in the context of your deployment. The Active Directory BPA is available in Server Manager

Tip#9
Active Directory Web Services
Active Directory Web Services (ADWS) provides a Web service interface to Active Directory domains and AD LDS instances, including snapshots, that are running on the same Windows Server 2008 R2 server as ADWS

Tip#10
Authentication mechanism assurance
Authentication mechanism assurance makes it possible for applications to control resource access based on authentication strength and method. Administrators can map various properties, including authentication type and authentication strength, to an identity. Based on information that is obtained during authentication, these identities are added to Kerberos tickets for use by applications. This feature is enabled at the Windows Server 2008 R2domain functional level.
Resource – http://technet.microsoft.com/en-us/library/cc754718(WS.10).aspx

cheers:)

Comments Off

Today I did my 2^nd presentation in New York, this time it was for New York Exchange User Group in the New York City (http://nyexug.com). It was a level 300 session where I covered Hyper-V on Windows Server 08 R2 and Hyper-visor R2 (core server). So what did I cover?

Difference between the 2 Hypervisor
New features and enhancement in R2 of Hypervisor
Better management of Hypervisor using Hyper-V Manager and RSAT tool
Initial setup and configuration of Windows Server R2 Hyper-V
Initial setup and configuration of Hyper-V Core Server
Setting up the network , joining to the domain and enabling remote desktop on Hyper-V Core Server
Setting up Firewall Rules on the Hyper-V Core to enable Remote Management
Accessing the Hyper-V Core Server from the remote client (Hyper-V Manager or RSAT on Windows 7 )
Device Management, Disk Management, Event Viewer, Firewall Management, Service etc of the  Core Server from the Remote Client i.e. Windows 7
Command Line configuration of Hyper-V Server Core firewall and remote managment.

Hyper-V_Final_1 - Presentation Slides

Resources
www.microsoft.com/Hyperv
http://blogs.msdn.com/virtual_pc_guy
http://edge.technet.com
http://technet.microsoft.com/en-us/library/ee344828(WS.10).aspx

Comments Off

In my last post I’ve mentioned that I was unable to configure the Ethernet Card and the Wireless network card.  Someone was following me on the twitter and he responsded me with the solution. So I’m thankful to him for helping me out and you can follow him @EvilEmoufDoom.

Problem # 1 – How-to disable power saving on the ethernet to avoid network card issue on Windows Server 2008 R2

Problem# 2- How to enable Wireless network working on Windows Server 2008 R2

Solution #1 Right click the network card —properties — Power managemnet- remove the checkbox.

Solution #2 - Go to Server management, add features — enable Wireless LAN services.

cheers

but still I need to find how-to disable the power option in Hypervisor Core.

Comments Off

Is virtualization all hype or can it reduce costs, make an admin’s life easier, & save the planet.

Come and join us on coming tuesday to see two falvors of virtualization at the same time.  I’ll be doing the demo of Q4 release of Microsoft Hyper-V and the Hypervisor and in additon how-to do the remote managment of Hypervisor.

The other session will be conducted by Ben (NY Exchange UG ). Ben is the UG leader for NYEXUG and he will share his expeirnce running exchnge in the VM. So do join us as we can accomodate max 30 person.

Click Here for details

Comments Off

I’ve setup Hyper-V Server R2 and then Windows Server 2008 R2. The installation phase went very smoothly but when the real thing had to configured it failed. The system was unable to load the network card driver unlike desktops Windows 7 or XP.

It make sense that a server system is not supposed to be a WiFi connected system and is supposed to be a stationary server system with network cable connected to it to a network switch, sounds pretty ok. So what was the problem then, after the installation I didn’t see any Ethernet Card except the Wireless network card when which was never been able to make connection to my internet router.

I spent heck of time but all the time it was a failure, I saw some very strange error while configuring the Ethernet but none of effort worked.  There was one very small stupid thing which really doesn’t make sense. And it was a Power problem, the laptop was on battery and by default Intel network card disabled automatically when there is no AC power connected or the laptop is on battery. ..it sucks it really sucks… but on the other side a server is always connected to AC. No idea whom to blame but I’d still suggest that please don’t try to save the power at this level.

So NEVER EVER AND EVER DISCONNECT THE BATTERY CHARGER WHILE INSTALLING ANY SERVER OS ON A LAPTOP.

Comments Off

When you are done with the brand new installation of Hyper-V Server you would need to press Ctrl+Alt+Del to log in to the server and then you need a username and the password which was never been asked to you during a tradional windows instalaltion, so what to do now.??? Simple , yes just enter the username “administrator” and then hit the Enter key, then it will prompt you to put a “new password” and “confirm password”.

cheers:)

Comments Off